Registered: Sep 2006
Location: NJ
Posts: 11

IVS on Linksys router - not working

Hi,

I had been chugging along fine with my Palmrouter sending and receiving shows. I have just recently set up a new Linksys router and it is not working (not contacting unit). Tried very hard not to have to post (mucho reading of forum and scouring the internet) but I am getting confused. I have tried to match the configuration settings that I had but something is off. Here is my setup:

• Replay 5040
• Linksys WRTU54G-TM firmware version v1.00.04
• ISP is Comcast
• Motorola SB5100 SURFboard Cable Modem
• IP: 192.168.1.100
• Internet Identity: Marklevinson1 00004-54831-74089
• Mac OS
• Using DCHP settings

Here is a link to a screen shot of my port forwarding configuration screen:

http://i43.tinypic.com/s5ebtu.jpg

I am suspecting it has something to do with the start and end numbers but I do not know.

thanks kindly,

Mark

Report this post to a moderator | IP: Logged

Registered: Feb 2004
Location: Olney, MD
Posts: 2358

Hey, Mark. Yes, the port forwarding is not correct. The "range" for a single port would be, for example, port 5040 to port 5040. Do you remember what port you used before? If not, go to your Replay, press Menu, then choose Setup, then Internet Identity and Address Book, and you can find the port you had set up in there. Then enter that port # for START and END values, and while I'm not sure about this, I'd change the Protocol to "both", because I'm pretty sure that UDP is used at some point. At least, it can't hurt.

EDIT: Never mind, I tried to do an IVS test on your Replay, and although it failed, it told me that it was trying to contact your Replay on port 29000. There, saved you some trouble.

__________________
-Max H.

Report this post to a moderator | IP: Logged

Registered: Feb 2004
Location: El Lago, Texas
Posts: 159

quote:

---

Originally posted by marklevinson1
Hi,

I had been chugging along fine with my Palmrouter sending and receiving shows. I have just recently set up a new Linksys router and it is not working (not contacting unit). Tried very hard not to have to post (mucho reading of forum and scouring the internet) but I am getting confused. I have tried to match the configuration settings that I had but something is off. Here is my setup:

• Replay 5040
• Linksys WRTU54G-TM firmware version v1.00.04
• ISP is Comcast
• Motorola SB5100 SURFboard Cable Modem
• IP: 192.168.1.100
• Internet Identity: Marklevinson1 00004-54831-74089
• Mac OS
• Using DCHP settings

Here is a link to a screen shot of my port forwarding configuration screen:

http://i43.tinypic.com/s5ebtu.jpg

I am suspecting it has something to do with the start and end numbers but I do not know.

thanks kindly,

Mark

---

__________________
Frank

My 5xxx Shows

Report this post to a moderator | IP: Logged

Registered: Feb 2004
Location: Olney, MD
Posts: 2358

Doh! I didn't even look at that "Application" field!

__________________
-Max H.

Report this post to a moderator | IP: Logged

Registered: Sep 2006
Location: NJ
Posts: 11

Apparently I didn't either.

Thanks Max and fbreshears. I will give that a go this evening when I get home from work.

Mark

Report this post to a moderator | IP: Logged

Registered: Sep 2006
Location: NJ
Posts: 11

Crap!
Didn't work, fellas.
Any other suggestions?

Thanks much,

Mark

Report this post to a moderator | IP: Logged

Registered: Feb 2004
Location: El Lago, Texas
Posts: 159

quote:

---

Originally posted by marklevinson1
Crap!
Didn't work, fellas.
Any other suggestions?

Thanks much,

Mark

---

__________________
Frank

My 5xxx Shows

Report this post to a moderator | IP: Logged

Registered: Sep 2006
Location: NJ
Posts: 11

That's true, but I do not see a way of changing anything but the last number.

Report this post to a moderator | IP: Logged

Registered: Dec 2004
Location: Largo, Florida
Posts: 961

quote:

---

Originally posted by marklevinson1
That's true, but I do not see a way of changing anything but the last number.

---

__________________
Ed, (used to be japi)
Poopli-a-holic Badge #007 [SECRETAGENTMUSIC=ON]

I've got some 5XXX shows too! Try Nded's Poopli. 20,000K Down/ 2,000K Up, Service with a Smile

WARNING! The words stated and the opinions expressed are not necessarily those of a sane person. Any action taken upon my advise is at your own risk. Your mileage may vary.

If you own a 4XXX or 5XXX ReplayTV and you aren't running WIRNS on your network, you should have your head examined.

Report this post to a moderator | IP: Logged

Registered: Feb 2004
Location: El Lago, Texas
Posts: 159

quote:

---

Originally posted by marklevinson1
That's true, but I do not see a way of changing anything but the last number.

---

__________________
Frank

My 5xxx Shows

Report this post to a moderator | IP: Logged

Registered: Sep 2006
Location: NJ
Posts: 11

Whew! Finally working.

Thanks guys, for your support.


Mark

Report this post to a moderator | IP: Logged